Trusted spray foam roofing & insulation services for Jacksonville, TX property owners. Licensed, insured, and backed by manufacturer warranties.
Professional roofing, coating, and insulation services for Jacksonville property owners and facility managers.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Jacksonville, TX is home to a growing mix of commercial, industrial, and residential properties — and Lapolla Industries serves all of them with professional spray foam roofing and insulation. Our SPF systems are particularly effective for the flat-roofed commercial buildings common in Jacksonville, where conventional membrane roofs develop seam failures and ponding issues within years of installation.
For Jacksonville facility managers and building owners, spray foam offers something no other roofing system can: a single application that provides waterproofing, insulation, and structural reinforcement simultaneously. No separate vapor barrier. No separate insulation board. No seams to fail. Just one seamless, self-adhering membrane that protects your Jacksonville investment for decades.
Quality, integrity, and results — the Lapolla Industries difference for Jacksonville property owners.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Common questions about spray foam roofing and insulation in Jacksonville, TX.
Spray foam insulation costs in Jacksonville typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Jacksonville homeowners see a full return on investment through energy savings within 3 to 5 years.
Yes. Every project in Jacksonville begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
A properly installed SPF roof in Jacksonville can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam is one of the best solutions for flat and low-slope roofs in Jacksonville. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Jacksonville crews evaluate the existing substrate to ensure it is structurally sound before application.
If your commercial roof in Jacksonville is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Scheduled a roof inspection before purchasing a commercial property. Their report was incredibly detailed — infrared moisture scans, core samples, photos of every deficiency. It saved us from buying a building with a failing roof."
"We had a persistent leak that three different contractors could not find. Their team used moisture scanning equipment and pinpointed it to a failed pipe boot in minutes. Fixed it the same day. Incredible diagnostic work."
"Our foam roof had some blistering and a couple of punctures from a maintenance crew walking on it. They repaired everything in one visit — cut out the damaged foam, re-sprayed, and recoated. Good as new."
Looking for a spray foam contractor near Jacksonville? We serve these surrounding areas too.